Mp-pumps HTO 300 INSTALL Manuel d'utilisateur télécharger pdf

FORM 3065-B

MP PUMPS HTO SERIES

HTO 300 INSTALLATION AND SERVICE INSTRUCTIONS

This bulletin must be read completely before installing, operating, or servicing the pump.

WARNING:

If any of the items listed below are violated, serious injury or death from burns caused

by hot oil may occur.

• DO NOT perform service or maintenance when

the pumping system is pressurized or hot -

serious injury or death from burns caused by

hot oil may occur.

• DO NOT operate the pump in a manner that it

was not intended to be used.

• DO NOT install for use in an open environment

where people are present.

• DO

NOT

install in a rigid piping system that

does not allow the pipe to expand and cause

the pump to be strained.

• DO NOT continue to operate the pumping

system when a known leak exists or the

system continues to smoke.

• DO NOT continue to operate the pump when

unusual noise or vibration occurs.

• DO NOT install or use near water where the

pumping system may come into contact with

water or is splashed by water.

• DO NOT operate beyond the pressure or

temperature limits stated in the product

literature, see form 9001.

• DO NOT allow severe temperature changes

to occur in a short time period within the

pumping system.

• DO NOT mix different types or grades of oil

within the oil system.

• DO

NOT

use an oil that is not a recommended

heat transfer oil by the manufacturer.

• DO NOT exceed the maximum oil temperature

rated by the oil manufacturer at the hottest

point in the pumping system.

• DO NOT mount the pump such that high

piping loads exist on the pump flanges.

1 2 3 4

Résumé du contenu

Page 1 - MP PUMPS HTO SERIES

FORM 3065-BMP PUMPS HTO SERIESHTO 300 INSTALLATION AND SERVICE INSTRUCTIONSThis bulletin must be read completely before installing, operating, or serv

Page 2

MP PUMPS HTO SERIESOPERATION AND MAINTENANCEThermal oil vapors leaking from a system can behighly flammable.Any system leak should be repaired immedia

Page 3

- 3 -APPLICATION AND INSTALLATION INSTRUCTIONSApplication assistance and technical information can be obtained by calling MP PUMPS at 586-293-8240.The

Page 4 - HOT OIL PUMP

HOT OIL PUMPITEM PART NO. DESCRIPTION QTY.1 30264 CAPSCREW STL 5/16-18 22 29833 COOLING FAN CLAMP DUCTILE IRON 13 21277 CAPSCREW S.S 3/8-16 34 29830

Commentaires sur ces manuels

Pas de commentaire

Mp-pumps HTO 300 INSTALL Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Pompes Mp-pumps HTO 300 INSTALL. MP Pumps HTO 300 INSTALL User Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels